How to install door on floors with different elevation-Preguntas y respuestas-Homestyler Forum

I have a floor with a different elevation, how do I adjust my door elevation. I tried using sunken ground and I also used model extrude, both scenarios the door does not go to the floor.

Comentarios(4)

brad.slakans 8 Noviembre 2021

Thanks Grace, I will give that a try, looks like it should work! @ Grace Simmons

Just posted: V4.0 Tutorial 13 - How to create a floor platform https://www.youtube.com/watch?v=oN1OyUQC2YQ

Respuesta

Grace Simmons 15 Octubre 2021

Just posted: V4.0 Tutorial 13 - How to create a floor platform https://www.youtube.com/watch?v=oN1OyUQC2YQ

Respuesta

Grace Simmons 13 Octubre 2021

Reverse your process. Don't do sunken floor. Start with a level floor. Then use custom floor or custom modeling to raise the section you want. Make your platform and then raise the door to match the higher floor. Just remember you may have to put in steps/ramps in the other rooms connected to the room with the higher floor!!

Respuesta

Homestyler Official 11 Octubre 2021

Hi, the door cannot be lower than 0mm elevation. So for this effect, please use the "customize floor" function (in "Customize" catalog on the left) to raise the other half floor, then you could elevate the door on that side.

Respuesta